The Schulte FX-315 mulcher is intended for mowing and crushing of any kind of vegetation from corn stubble, sunflower, rape, wheat to small bushes and trees
Can be used for grinding green legumes (peas, beans, soybeans, lentils); grasses (vetch, rank, alfalfa and clover), which in turn are organic fertilizers rich in nitrogen. When rotting the crushed mass creates a layer of compost, which helps retain moisture in the fields and protects the soil from water and wind erosion.
Qualitatively grinds not only dry, but also cheese, and green stubble of corn, sunflower, rape, wheat in one pass
Main Technical characteristics:
The complex design of the machine provides transport overall dimensions of 2.5 m with a working width of 4.6 m.
The system of drive shafts and reducers includes the main junction box with a capacity of 260 hp. and working angular reducers on rotors with a capacity of 210 hp Which gives a double margin of reliability of the machine when working in extremely difficult conditions.
This SCHULTE FX-315 mulcher with vertical rotor placement has a dome-shaped section design, which avoids excessive machine weight compared to competitors, increases the structural rigidity of the frame and reduces debris accumulation and prevents rust from moisture.
Adjustable protective cover near the rotors allows you to change the flow of material from the knives and optimizes grinding and weight distribution.
New patented SCHULTE replaceable rotor ring.
The Speed Leveling system allows you to quickly and synchronously change the level of the machine relative to the field surface at the level of the support wheels (rear) and the drawbar * connected to the tractor (front).
The speed of rotation of the knives is 4,869 m / s. and the optimal angle of inclination of the working surface of the knife to the stubble allows to increase the productivity of the machine, improve grinding and weight distribution across the entire width.
Advantages of using the Schulte FX-315 mulcher:
High-quality grinding of dry, raw and green mass of corn, sunflower, rapeseed, wheat and other crops in one pass. Ability to work in late autumn and early spring on moist soil
The machine breaks the stalk of corn at the place of cutting with a reaper, which allows you to turn on the process of rot of this stalk in winter and prevents infection of the stem field with a butterfly. The butterfly dies in crushed corn stalks under the influence of: precipitation, wind, frost.
Reduces soil preparation time due to high productivity
Reduction of energy consumption for soil preparation for sowing after sunflower and corn;
Improving the efficiency of applied fertilizers;
Thanks to deflectors the maximum uniformity of distribution of the crushed weight on a field surface is reached.
Drive gearboxes for 260 and 210 hp allow you to work stably and for a long time in extremely difficult conditions.
The dome-shaped body provides strength and durability, while reducing the risk of burning plant residues and reduces corrosion
Double protection of cardan shafts and reducers – friction couplings and cut bolts on fixed knives
The minimum width of transportation is 2.52 m.
The use of fixed knife technology allows you to better cut, grind, and distribute the crushed mass across the width of the grip.
The unique Schulte cardan transmission layout provides independent clutch protection for each rotor
Support adjustable wheels allow to carry out works on a relief ground, copying roughnesses.