Menu Close

Rotary mower, SCHULTE mulcher of the FX-1800 series

Categories: ,
Залиште свій телефон


    Basic features:

    Working width: 4.6 m

    Tractor power: 65-150 hp

    Cutting height: 16-445 mm.

    Maximum diameter of a cut: to 89 mm.

    Double protection of cardan shafts and reducers – friction couplings and cut bolts on fixed knives

    The minimum transport width / height is 2.52 / 2.13 m

    Weight – 2570 kg



    Mower-mulcher of the Canadian manufacturer Schulte series FX-1800 is designed for mowing and chopping any type of vegetation from small shrubs and trees to stubble of corn, sunflower, rapeseed, wheat.

    Qualitatively grinds not only dry, but also raw and green stubble of corn, sunflower, rapeseed, wheat in one pass.


    Main Technical characteristics of SCHULTE FX-1800:

    The complex design of the machine provides transport overall dimensions of 2.5 m with a working width of 4.6 m.

    The system of drive shafts and reducers includes the main junction box with a capacity of 194 hp. and working angular reducers on rotors with a power of 168 hp Which gives a double margin of reliability of the machine when working in extremely difficult conditions.

    This SCHULTE FX-1800 mulcher with vertical rotor placement has a dome-shaped section design, which avoids excessive machine weight compared to competitors, increases the structural rigidity of the frame and reduces debris accumulation and prevents rust from moisture.

    Thanks to the adjustable deflectors near the rotors allows you to change the flow of material and thus achieves optimal grinding and the most uniform distribution of mulch on the field surface.

    New patented SCHULTE replaceable rotor ring.


    Advantages of using the Schulte FX-1800 mulcher:

    High-quality grinding of dry, raw and green mass of corn, sunflower, rapeseed, wheat and other crops in one pass. Ability to work in late autumn and early spring on moist soil
    The machine breaks the stalk of corn at the place of cutting with a reaper, which allows you to turn on the process of rot of this stalk in winter and prevents infection of the stem field with a butterfly. The butterfly dies in crushed corn stalks under the influence of: precipitation, wind, frost.
    Reduces soil preparation time due to high productivity
    Reduction of energy consumption for soil preparation for sowing after sunflower and corn;
    Improving the efficiency of applied fertilizers;
    Thanks to deflectors the maximum uniformity of distribution of the crushed weight on a field surface is reached.
    Drive gearboxes for 260 and 210 hp allow you to work stably and for a long time in extremely difficult conditions.
    The dome-shaped body provides strength and durability, while reducing the risk of burning plant residues and reduces corrosion
    Double protection of cardan shafts and reducers – friction couplings and cut bolts on fixed knives
    The minimum width of transportation is 2.52 m.
    The use of fixed knife technology allows you to better cut, grind, and distribute the crushed mass across the width of the grip.
    The unique Schulte cardan transmission layout provides independent clutch protection for each rotor
    Support adjustable wheels allow to carry out works on a relief ground, copying roughnesses.

    The Speed ​​Leveling system allows you to quickly and synchronously change the level of the machine relative to the field surface at the level of the support wheels (rear) and the drawbar connection to the tractor (front)


    The speed of rotation of the knives is 4,710 m / s. and the optimal angle of inclination of the working surface of the knife to the stubble allows to increase the productivity of the machine, improve grinding and weight distribution across the entire width.

    The 7 ga single-dome continuous continuous deck makes this rotary cutter extremely easy to clean, prevents water and rust build-up, and helps remove debris.

    The overlap of the blades is 6.5 inches and the high speed of the blade tip.

    Drive with four gearboxes with independent friction clutches. The FX-1800 uses high-strength and extremely reliable Bondioli gearboxes. The splitter has input and output shafts measuring 1 3/4 inch with 20 slots and designed for 260 hp. (194 kW). The central and side boxes have input shafts of 1 3/4 inch 20, lower shafts 2 3/8 inch and are designed for 225 hp. (168 kW).

    The 80 ° CV shaft ensures smooth power transmission during sharp turns. CV for 540 rpm belongs to category 6, and for 1000 rpm – to category 5. peak performance. All couplings are located under the main shield for easy maintenance.

    7th caliber pneumatic jumpers (round pallets) provide strength and balance.

    Available with 540 or 1000 rpm drive.


    Call me!