Menu Close
  • [elementor-template id="2577"]

     


    Basic features:

    Frame: Reinforced 6 x 6 x 3/8 inch high strength steel.

    Bearings: Constantly floating in the oil bath, Timken tapered roller bearings.

    Gasket protection : Duo-Cone with powerful forged body.

    Axis: 54 mm, made of hardened high-strength alloy steel.

    Coils : 26.67 cm steel “Torsion Bell” to provide tension to the discs in the battery.

    Wheels: 8mm x 660mm, 8mm x 770mm. SMOOTH, CAMOMILE, LABRADOR

    Wheels: Implement class, mounting – 8 bolts.

    Hydraulics: Two 5 x 8-inch hydraulic cylinders complete with hoses, depth control segments and cylinder transport lock.

    Paws: Powerful paws for deep cultivation up to 45 cm.

    & nbsp;

  • [elementor-template id = "2658"]

     


    Basic features:

    Tractor hitch CAT II bilateral;

    Drive through the shaft 3/8 ” Z6 on the angular reducer;

    Turnover of GDP 540 rpm;

    Gearbox with a rotor speed of 2,000 rpm

    Width of hammers – 120 mm

    Drive on the rotor through a 4-stream pass;

    Lubrication system at one point;

    Adjustable support skis

    Possibility of a complete set with a skating rink or protective chains

    Double-sided double chain protection against ejection of shredded material

    Reinforced support roller

    Working speed – from 500 m / h

     

  • [elementor-template id = "2678"]

     


    Basic features:

    2-terminal connection system

    Rubber connection points; in each connection on 4 rubbers;

    Standard disk size 51 cm;

    Pipe roller (2 pieces);

    Adjustable hydraulic roller piston;

    Plate coating;

    32-36-40-44-48 discs

  • [elementor-template id = "2664"]

     


    Basic features:

    1. Universal 3-point connection
    2. Cardan shaft with protective bolt – 3/8 ”Z21
    3. Rotor checkpoint 540 rpm Tractor GDP provides rotor speed within 170 rpm
    4. High quality forged knives 7 cm thick
    5. Adjustable back plate
    6. 6 knives on each flange, 3 knives on the extreme flanges
    7. Powerful gear reducers
    8. Support skis.

     

  • [elementor-template id = "2669"]

     


    Basic features:

    1. Universal 3-point connection
    2. Cardan shaft with protective bolt – 3/8 ”Z21
    3. Rotor checkpoint 540 rpm Tractor GDP provides rotor speed within 170 rpm
    4. High quality knives 7 cm thick
    5. Adjustable back plate
    6. 6 knives on each flange, 3 knives on the extreme flanges
    7. Powerful gear reducers

     

  • [elementor-template id="2697"]

     


    Features of the Serrat FX T-2300 mulcher

    Forest concept rotor with fixed teeth made of tungsten carbide or with movable hammers rotating 360 °

    Gearbox with overrunning clutch of the rotor to reduce the load on the transmission.

    The rotor of POLSER + with a diameter of 550 mm is included.

    Frame made of high-strength steel, thickness 10 mm

    POLSER + rotor, 550 mm in diameter.

    SERRAT reducer.

    3/4 drive belt XPC.

    Forged hammers (optional – fixed hammers with tungsten plate or DRR blades).

    Front protective plate.

    GDP 1000 rpm

    Anti-conduction system on the rotor.

    Steel cutting plates.

    Skiing.

    For tractors with a capacity of 80 to 150 hp Adapted for MTZ-1221.

  • [elementor-template id = "2647"]

     


    Basic features:

    Universal 3-point connection

    Disks for protection of plants

    Lock mode

    Height-adjustable wheels

    Spring-loaded rack

    Such equipment can be added as an option (photo)

    Container for dry mineral fertilizers

    Weeding system

    Plow for furrow

    Rolling rink

     

  • [elementor-template id="2581"]

     


    Basic features:

    Frame: Reinforced 15.24 x 10.16 x 0.95 cm made of high-strength steel.

    Bearings: In the oil bath, tapered Timken.

    Seal protection : Duo-Cone and powerful forged body.

    Axis: 54 mm, made of hardened high-strength alloy steel.

    Coils : 26.67 cm steel “Torsion Bell” to provide tension to the discs in the battery.

    Wheels: 8mm x 660mm Chamomile, or wavy Labrador 8mm x 770mm.

    Wheels: Implement class, mounting – 8 bolts.

    Hydraulics: 127 mm diameter hydraulic storage cylinders.

  • [elementor-template id = "2643"]

     


    Basic features:

    Universal 3-point connection cat.2

    GDP – 3/8 ”Z6

    4-speed checkpoint, providing rotor speed from 195 to 437 rpm at PTO speed 540-750-1000 rpm

    The length of the hoe knives is 280 mm, the thickness is 12 mm

    The roller is hydraulically adjustable in level with anti-stick cleaners

    Toscano rotor protection system

    Protection system against jamming of rotors and jamming of stones and other objects

    Adjustable leveling bar

    Adjustment of a lateral protective cover

    Frontal protective shields

    Optional can be set (photo below)

    1. Seeder hitch
    2. Rippers
    3. Depreciated deep rippers
    4. Extended cultivator frame

    Hydraulic system of regulation of level of a roller. Covers

     

  • [elementor-template id = "2672"]

     


    Basic features:

    1. Universal 3-point connection
    2. Cardan shaft with protective bolt – 3/8 ”Z21
    3. Rotor checkpoint 540-750-1000 rpm Tractor GDP provides rotor speed in the range of 151-343 rpm
    4. High quality knives 8 mm thick
    5. Rolling Roller
    6. Adjust the position of the cat
    7. Powerful side reducers
    8. Rippers
    9. Protective plates
    10. 6 knives on the flange

     

  • [elementor-template id = "2639"]

     


    Basic features:

    Universal 3-point connection cat.2

    GDP – 3/8 ”Z6

    4-speed checkpoint, providing rotor speed from 195 to 437 rpm at PTO speed 540-750-1000 rpm

    Length of hoe knives – 300 mm, thickness – 15 mm

    The roller is hydraulically adjustable in level with anti-stick cleaners

    Toscano rotor protection system

    Protection system against jamming of rotors and jamming of stones and other objects

    Adjustable leveling bar

    Adjustment of a lateral protective cover

    Frontal protective shields

    Optional can be set (photo below)

    1. Seeder hitch
    2. Rippers
    3. Depreciated deep rippers
    4. Extended cultivator frame

    Hydraulic system for adjusting the level of the roller.

     

  • [elementor-template id = "2661"]

     


    Basic features:

    Tractor hitch CAT II bilateral;

    Drive through the shaft 3/8 ” Z6 on the angular reducer;

    Turnover of GDP 540 rpm;

    Gearbox with a rotor speed of 2,000 rpm

    Width of hammers – 120 mm

    Drive on the rotor through a 4-stream pass;

    Lubrication system at one point;

    Adjustable support skis

    Possibility of a complete set with a skating rink or protective chains

    Protection by shields against ejection of crushed material

    Reinforced support roller

    Working speed – from 500 m / h

     

  • [elementor-template id="2682"]

     


    Basic features:

    Universal 3-point connection to the tractor cat. 2, 3

    The system of loosening wings

    2 ring-spur rollers

    Indicator of depth of work of the car

    Adjustment of depth of cultivation at the expense of the rolling roller

    Thickness of racks – 30 mm

    Overload protection system due to shear bolt.

    Optionally you can offer:

    Adjustable side guards

    Skating rink with two rows of corrugated discs

     

  • [elementor-template id = "2636"]

     


    Basic features:

    Universal 3-point connection cat.2

    GDP – 3/8 ”Z6

    4-speed checkpoint, providing rotor speed from 195 to 437 rpm at PTO speed 540-750-1000 rpm

    The length of the hoe knives is 280 mm, the thickness is 12 mm

    The roller is hydraulically adjustable in level with anti-stick cleaners

    Toscano rotor protection system

    Protection system against jamming of rotors and jamming of stones and other objects

    Adjustable leveling bar

    Adjustment of a lateral protective cover

    Frontal protective shields

    & nbsp;

    Optional can be set (photo below)

    1. Seeder hitch
    2. Rippers
    3. Depreciated deep rippers
    4. Extended cultivator frame

    Hydraulic system for adjusting the level of the roller.

     

CALL ME
+
Call me!